Learning How To Make A Pond Aerator
Teaching yourself how to make a pond aerator can not only be fun and benefit your entire backyard ecosystem, it can also help you drastically cut down on costs. An aerator can make the water cleaner and healthier and make the entire pond a much more comfortable and safe place to keep fish. If you are planning on stocking your pond with fish, then building a pond aerator needs to be one of the first things that you look into doing. If you do not then you will put the fish in danger in many instances, and probably spend quite a bit of money restocking the pond constantly over time.
The first thing you need to do if you want to learn to build pond aerator is figure out the features and size of your pond. If you have a smaller area then you can use a simple air pump with air stones and short tubing. However, if the pump you use, aside from your small submersible pond pumps, is not suitable for outdoor use then you need to build a plastic box and place the pump inside. Just be sure not to enclose the box too much and have holes so oxygen can stop the pump from overheating. Basically, you need to ensure that weather and climate cannot affect the pump but you have to still make sure that there is enough air getting in around the sides in order to keep the pump cool. If the pump overheats then your aerator will instantly stop working, and you could have issues if you do not notice right away.
A lot of preformed garden ponds state they do not require an aerator, but without it you usually do not have the oxygen levels that you need within the water. This can force fish to the surface until the water gets too warm and uncomfortable to keep them alive. Solar energy can also really help when building an aerator, but can make things pretty complex.
To make use of your own aerator you can then start by taking a standard pump that is rated to hold as many gallons as your pond holds. The higher the number, the better in most instances. Then you should measure the depth of the pond and deduct the measurement in terms of the height of the pond filter that you use. Once you have done so, you can continue learning how to make a pond aerator by deducting a few inches from your measurement to take into account some water evaporating.
After you have made all of your measurements you should cut a piece of tubing to match the length of the exact measurement you have. PVC tubing is usually the best to use and works well with most backyard pond designs. Attach the rigid tubing to the pond pump outlet tubing and then place the entire thing into the pond and turn your pump on. If you have learnt how to make a pond aerator then water should start shooting up from the surface instantly.
